Look at Options for Finishes and Floor Coatings for Industrial Use

In the industrial world, there are many things that have to be extremely durable. Flooring is not always as durable as what it seems. Floor coatings for industrial use should be considered if a company uses many different types of chemicals or a lot of water during their production processes.

Every company manufactures different things. They use different oils, chemicals and even the temperature could be different in every part of the production process. Cement may break down from these things so it is important that cement floors are being protected where they need it.

Most of the time, the coating is going to be applied to the entire floor surface, not just around machines or in high traffic areas. This is done with nothing on the surface of the floor. Some floors will have to be done in a couple of parts because there may not be any other place to set the products that are in the room so they will move it to one side to coat the floor and then back to the other side after it dries.

Factories will use a lot of different things to machine parts and wash their machines. It is important to have drains through the floors too. The coating is going to make the flooring look better as well as easier to clean up messes that occur.

Whatever gets spilled is not going to soak into the floor. Oil or other substances will not stain it either. There are a lot of different things that are going to be spilled during the production process. It is easy to do when people are not paying attention or they feel rushed.

Every production line is set up different too. Some people will be standing all day long while other people are able to sit. People who have to stand will tend to move their feet a lot which is going to cause wearing in that spot on the floor. The owner or maintenance is going to have to keep track of these areas so that the floor can be resurfaced before it wears through the coating.

Even though the coating is very strong and durable, it will still wear some. It can also get scratched by things that are rubbing against it constantly. A fork lift driver that lets the skids slide on the floor is damaging the floors too.

It is important that all of the employees are keeping track of how they are working and notice when they do these things. They may cost the company a lot of money each year because of this. The epoxy coatings that are applied to a concrete floor can get slippery if it is wet.

They can be cleaned with floor cleaner and water just as other floors are. Every person is going to prefer a different cleaner. Industrial processes can use many different things. Heavy pieces could also fall on the floor and damage it.

Everybody can accidentally drop something. It does not matter if it is a tiny item or a large and heavy item, it could cause damage to the floors. Employees do not always take care to be careful of the flooring or other things around the factory that they work in.

There are many different floor coatings industrial cleaners and many other things that are going to be used for factories, auto repair shops and many other places. There are several different types of things that people use each day that they are going want to think about before putting on their cement floors. Coatings for flooring that are an industrial strength is going to be necessary in some industries but could be a precaution that others are taking.

Reasons to Choose Epoxy Garage Floor Coating

It used to be difficult to find appropriate coating for your garage because products on the market were oil-based or latex paint, which cause paint lifting and peeling. As a result, it was difficult to maintain a clean garage floor. Even though, gloss paints clean up easily, it was slippery when it became wet and a danger to anyone who stepped on it. Therefore, some homeowners kept the concrete flooring to avoid the danger that these products cause. Today, homeowners can purchase epoxy garage floor coating, which provides better coverage for the floor without the problems of the past.

Epoxy is an ideal garage floor coating for oily and dirty garage whether commercial or residential. It withstands frequent tire movement without floor damage and is superior to other products on the market. It is durable, resistant and tolerates any type of automotive fluid. Cleaning your garage is easy when you use this product. Sweep the floor to remove dirt and debris and then mop the floor using warm soap and water regularly.

Epoxy floor coatings uses a chemically cured substance and is composed of two parts epoxy. Using one coating provides a beautiful gloss appearance that lasts a long time and is able to withstand extreme hot temperatures. It does not lift or peel due to the heat of hot tires like other floor coating product on the market.

Installing epoxy floor coating can be a little on the tricky side make sure you understand the manufactures instructions before you start. Clean the garage floor first because it requires a clean surface to help the substance adhere to the flooring. Give the floor a profile chemically or manually. Apply the coating with the recommended applicator. In roughly 8 to 12 hours, the floor will feel dry to touch. However, it takes at least 72 hours to dry completely, and to accommodate parking of your vehicle.

Is Your Epoxy Garage Floor Coating 100% Solid? Does it Matter?

Not every epoxy garage floor coating is the same and with garage flooring, like many other things in life, you don’t always get what you think. When learning about something new, such as garage floors, it’s not hard to skip some features which may be important to you, especially if you didn’t even know they existed. For example, let’s examine a lesser known epoxy paint specification that may still be very important to you. Let’s take a look at the idea of an epoxy coating’s percentage of solids.

Percentage Of Solids? What Does That Mean?

Obviously all epoxy garage floor coatings start in a liquid form. Otherwise there would be no way to put it on the concrete garage floor. The term “percentage of solids” is an indication of the amount of the chemical mixture that will be solid in the end. To understand this, think about an epoxy adhesive. When you use epoxy adhesive, it’s completely solid when it dries, with no evaporation. In the case of an epoxy coating, though, this might not work quite this way.

But Where Is The Percentage Of Solids Listed?

Like most companies, regardless of the products they produce, the manufacturers of epoxy garage floor coatings tend to leave out any specifications that their product does not excel in. This makes it harder for the consumer to know if he is getting the appropriate product. In general, those epoxy coatings that are not 100% solid won’t tell you in so many words. Instead, they will be referred to as water, or acrylic based. Of course, any epoxy garage floor paint that is 100% solids will generally advertise it quite proudly.

Do I Really Need An Epoxy Paint Blend That Is 100% Solid?

You really, most likely, do not. However, you might miss the extra solidity if you ever drop a tool onto your nice, shiny, painted floor. Most people use some sort of garage floor covering on their paint to keep it nice looking, so they’ll never even notice that they’re using one of the many garage floor finishes that are water based. However, there’s just not that much of a difference in price between 100% solid, and the watered down epoxies. Some water or acrylic based paints even cost more than epoxy blends that are 100% solid. This is one of those industry secrets that probably wouldn’t be considered socially acceptable if the general public even knew.

Why Every Epoxy Garage Floor Coating Is Not 100% Solid

The most likely reason is profit margins. Any successful company makes the least expensive product and sells it for as much as possible, while not risking their reputation. So, if they can water it down a bit, charge the same amount, and have people buy it and be happy with it, then why not? Does this mean that you should avoid all water based epoxies on principal? Well, that’s where you have to make your choice. Do you go with the little guy who doesn’t have the reputation but promises a better product for less, or do you buy from the big name and hope you don’t notice the difference? When shopping for an epoxy garage floor coating, like many other things, it really just depends on the type of consumer you are.