Some Facts on Industrial Floor Coating

With the upward growth of concrete use in households and buildings, it can be deduced that the use for industrial floor coating has increased as well. It’s only natural as many now conceive that concrete and coatings come together more nicely than just concrete only. These days, you also consider the concrete coating when you think about the concrete for your home or building. This is only reasonable after seeing the aesthetic and durability results of having coated concrete. Isn’t it just nice to look at your concrete floor when it is so nicely textured ad patterned? Walls and countertops can also be significantly improved with the help of concrete coatings.

Many people are generally familiar with industrial floor coating. However, some facts have been mixed with some myths about floor coatings. Here are some points to straighten out what’s true and what’s not:

Coatings and Coloring Mixtures: No matter how they may seem like coatings, some products that enhance the appearance of concrete are not really considered as coatings. Chemical stains like acid stain, for example, is not exactly a coating. It is actually a coloring process that creates a chemical reaction with the concrete surface. There are a lot of other products that may be considered as floor coating to some people, but technically are not.

The Real Process of Coating Concrete: It is a general thought that coating would initially fail because, by its nature, it would bridge the porous surface of the concrete and trap the moisture present in the surface. You see, the moisture vapor should be allowed to escape. If not, there will be problems of blistering, peeling, and delamination, all of which contribute to concrete coating failures. Nowadays, though, there are products available that dismiss the initial thought. New elastomeric coatings are one of these products. It is the application of a thick elastic film that enhances the concrete surfaces and conceals cracks, patches, and other concrete problems.

Curing Period of 30 Days: Some coating products can be used after just seven days of curing. You’ll have to read the manufacturer’s instructions carefully and see if this applies to your coating product.

Concrete Block Fillers: Some people deem concrete block fillers unnecessary. But using the block fillers will enhance the concrete surface. It provides a stable foundation and fills up the pores and voids in the surface. With regards to block fillers that are heavy and difficult to apply, there are block fillers available nowadays that will save you some time and effort. These new block fillers also weigh less than the traditional ones.

These are only some of the issues that needs to be cleared up. These facts may not seem worthy of your time. But when it comes to choosing and applying coating on your concrete surfaces, these may help. The curing period of seven days and the new concrete block fillers, for example, can help in saving you some time while improving the quality and durability of your concrete. Facts like these can be helpful, even in just small ways, when you do the application for industrial floor coating.

General Information on Garage Floor Coatings!

Covering a surface with some material or a mix of different materials on a surface to protect and safeguard it from any corrosion or harm is known as coating. When a surface is coated, it helps that particular area to retain its original fresh appeal and sheen. Different kinds of materials are used to give coating, and each material is essential to get a perfect mix in order to bring out the perfect finish what we expected. Normally, coatings are made of paints and lot of other additives.

Since there are lots of materials, you should know to pick the right kind of substance or material that will be suitable for your surface. Go for some good ones like American specialty coatings. There are different types of coatings which include metal coating, garage floor and roof flooring and swimming pool coatings. In these coatings itself you will find different quality types, and according to the quality the price also will differ, so when you are deciding which coat to use, think twice because it should be affordable, at the same time it should be of good quality and durable as well.

Though price is the major factor which might influence your decision, make sure you don’t budge from your decision just for the sake of price, because all highly priced products are of good quality which are manufactured by very reputed manufacturers. Epoxy coating is one of the fast moving and popular one which is extremely strong and durable. Epoxy coatings are also known as marine coating. It is best suitable for swimming pools because it protects from hazardous effects of UV rays and irregular chemical conduct of water.

Texas Garage floor coatings have epoxy like substances, which gives it a ceramic like finish. Epoxy is nothing but a liquid mixture of two substances which acts like a sealant and protective finish.

This type of coating is a very good option for garage floor coating. Garage floor coatings are becoming very famous, due to the visual and protective benefits that it offers. These days’ lots of garages are being renovated into workshops, stores, offices etc. Due to this reason, there is an increasing demand in keeping the garage floors cleaner and tidy. An epoxy garage floor can withstand grease, oil, dirt and water without damaging the surface.

Due to raise in demand for this product, various other options like quartz and black marble can give a fine finish to the floor. Black marble will give a showroom type of finish to your garage. The protective benefits of garage floor coatings are matchless. The sealant will protect against dirt, grease, oils, cracks and weathering’s and also any other means which can litter or dirty the place. Floor coatings are considered to be stronger than regular concrete floor coating. The result of this would be an intense extension in the endurance of your garage floor.

A Guide to Concrete Floor Coatings Selection

To select the best industrial concrete floor coatings for your facility, the first thing to c0onsider is the criteria to be used in your selection. Nearly all types of flooring requirements can be addressed by various industrial concrete floor coatings systems. Identify the requirements for your specific floors, which can be any of the following:

1. For repair and protection. Many floor coatings options cater to floor maintenance, repairing damaged surfaces, and offer protection from various types of floor abuses, such as chemical spills, abrasive impacts or physical loads, to name a few.

2. For quality performance and durability. Industrial concrete floor coatings contractors can install high-performance floors that last for long periods of time. The thickness of coatings used, plus the type of coating product applied, can vary the strength and durability of installed floor coatings systems.

3. For beautifying drab-looking floors. Industrial concrete floor coatings can transform floors in any areas of the facility — employee lounge, shop floors, loading bays, among others.

4. For cheaper and practical floor solutions. When you’re after a minimum amount of expenditure for your industrial floor project, this is possible with industrial concrete floor coatings that are less expensive but still perform well, fitting your budget and project requirements at the same time.

Concrete Coatings for Floor Repair

When signs of floor damage appear, facility managers should waste no time in replacing the industrial concrete floor coating system. Putting off the work will result to negative consequences such as:

1. Unsafe floorings that may lead to potential accidents for building occupants, due to uneven floors, low-friction or non-skid-resistant surfaces.

2. Dirty-looking floors despite constant cleaning.

3. Unhygienic floors that encourage the growth of harmful bacteria lodging in difficult-to-clean floor cracks.

4. Worsen floor damage as time goes by.

Epoxy-based fillers may be applied to level the holes and remove unevenness in surfaces. For deep cracks, sand or quart-mixed epoxy fillers will have to be used fill the bottom. For hairline cracks, sanding will remove coating unevenness and blend the edges to make banish the crack. In cases of large cracks, repairing the floor foundation is necessary before any coating system can be installed.

Concrete Coatings for Floor Make-Over

Industrial concrete floor coatings transform facility floors back to their original look. You can choose from any of the following, based on your unique requirements:

1. Glossy coatings. Clear epoxy gloss is standard choice for floor beautifications. The colorless formulation can hide tiny floor imperfections.

2. Satin coats. Shark-grips mixed in industrial concrete floor coating lend a rough texture to the floor, leaving the top coat with a satin sheen that hides minor damages, and makes for easy-to-clean and skid-resistant surfaces.

3. Colored chips. Multi-hued chips applied on still-wet top coats can enhance the look of floors. The chips are broadcasted in measured amounts and certain distances from each batch, or applied using a pail with holes in the bottom, to achieve the right chip density and appearance on the surface.

The choice of the most appropriate coating product has to be a careful balance of monetary considerations and practical or functional requirements.

When cost is the biggest factor in coatings selection, facility managers must remember to insist on quality and good performance. Cost-savings that sacrifice quality is useless, due to further repairs and rework needed in the future.